ANALYSIS OF PLASTIC MOLD FILLING PROCESS WITH UNIQUE GATE AND RUNNER SYSTEMS

Authors

  • G.Rajendra Prasad Dr. S.Chakradhar Goud Author

Keywords:

Mould filling analysis, hot metal distribution, case study

Abstract

This paper presents the design of plastic injection mould for producing a plastic product. The plastic part was designed into two different types of product, but in the same usage function. One part is using clip function and another part is using tick function. In the computer-aided design (CAD), two plastic parts were drawn in 3 dimension (3D) view by using SIEMENS 8.0 parametric software.For mould design, the product was designed into two changeable inserts to produce two different types of plastic product in one mould base. Before proceeding to injection machine and mould design, this part was analyzed and simulated by using Ansys 15.0. From the analysis and simulation we can define the most suitable injection location, material temperature and pressure for injection. In the present work Component selected for conveyor chain locking links

Downloads

Published

2017-05-11

Issue

Section

Articles

How to Cite

ANALYSIS OF PLASTIC MOLD FILLING PROCESS WITH UNIQUE GATE AND RUNNER SYSTEMS. (2017). Global Journal of Advanced Engineering Technologies and Sciences, 4(5), 45-52. https://gjaets.com/index.php/gjaets/article/view/150

Most read articles by the same author(s)

<< < 23 24 25 26 27 28 29 30 31 32 > >>